FUDforum: Diagnostics Software and Testing Procedures

Home » » Diagnostics Software and Testing Procedures » Test Plug Pin-out Location (Where is the location for loopback plug pinouts)

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Test Plug Pin-out Location [message #1138]

Thu, 07 February 2019 16:13

cradkins
Messages: 1
Registered: February 2019

Junior Member

I've found an old link to obsolete products for the UPCI RS422 and RS232 products to create loopback plugs. Specifically for Comtrol Product numbers 99341-4 and 99401-5. However it points to an ftp site with a broken link. Does anyone know where to get the information for these products to build loopback plugs?

Report message to a moderator

Re: Test Plug Pin-out Location [message #1139 is a reply to message #1138]

Thu, 07 February 2019 16:16

Matt
Messages: 18
Registered: November 2018
Location: Minnesota

Member

Sure, here's a PDF that shows how to make them:

http://downloads.comtrol.com/contribs/devicemaster/help_file s/Loopback.pdf

Matt Mayfield
www.comtrol.com

Comtrol Corporation
100 Fifth Avenue NW
New Brighton, MN 55112
(763) 957-6000

Report message to a moderator

Re: Test Plug Pin-out Location [message #1288 is a reply to message #1138]

Thu, 21 January 2021 15:07

rockas
Messages: 1
Registered: January 2021

Junior Member

This help me much

Report message to a moderator

Re: Test Plug Pin-out Location [message #1321 is a reply to message #1288]

Tue, 09 February 2021 10:48

Kurt
Messages: 283
Registered: July 2016
Location: Minnesota

Power User

Hi rockas,

Glad to hear it!

Kurt

Kurt Rees
www.comtrol.com
http://forum.comtrol.com/

Comtrol Corporation
100 Fifth Ave NW
Minneapolis, MN. 55112
Direct +1 763.957.6000 | +1 Fax (763) 957-6001
connect. communicate. control

Report message to a moderator

Previous Topic:

Industrial Ethernet Test Platform

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Feb 26 21:40:00 CST 2021

Total time taken to generate the page: 0.00635 seconds